Open Music Labs Forums

this is no longer accurate, see final post

; current programs and their memory locations
;
; code switch memory address/data bits/channels - function
; ----- ----------- --------------------------------------------
; $0200 = position 07 = 18b/16b/stereo - delay - pot controlled (3ms - 3s)
; $0400 = position 06 = 16b/16b/stereo - delay - pot controlled (0s - .7s)
; $0600 = position 05 = 16b/16b/mono - vco with vca
; $0800 = position 04 = 16b/16b/stereo - upsweep - pot controlled
; $0a00 = position 03 = 16b/16b/stereo - reverser
; $0c00 = position 02 = 16b/16b/stereo - up/down sweep
; $0e00 = position 01 = 16b/16b/stereo - delay - rotary encoder controlled
; $1000 = position 00 = 16b/16b/mono - reverb
; $1200 = position 15 = 16b/16b/mono - fullwave rectifier
; $1400 = position 14 = 16b/16b/mono - gated reverser
; $1600 = position 13 = 16b/16b/mono - envelope stripper as vca on rampwave
; $1800 = position 12 = 16b/16b/mono - ring modulator
; $1a00 = position 11 = 16b/16b/mono - sampler - pot controlled playback speed
; $1c00 = position 10 = 16b/16b/mono - 16 voice chorus
; $1e00 = position 09 = 16b/16b/mono - flanger
; $2000 = position 08 = 16b/16b/mono - sampler - rotary encoder controlled playback speed

this all brings up a good question
what 16 programs should the microdec come preloaded with
we should probably nail this down soon
so we can get those polished for release

I am assembling the program & have a couple of lookup tables.(I can't find them, anyway)..

sinewave-16b-512s.asm
tone_chart-16b.asm

Are these posted?

Thanks

I think I would be interested in this. Also, been meaning to ask,
I have the modern device's USB breakout board, with the FT232R chip,
will that work for programming the microdec?