## (g) 5.30.11 guest
##
## tack this bit on after all the rest
##
## the bootloader part is not really supported at the moment
## but that is a pretty easy fix if someone wants to do it
## im also not positive on the lock bits as i think there is
## some masking involved
##
## this may or may not work with all the arduino stuff
## there is also a 5 minute timeout on the x0x bootloader
## so if the sketch is taking too long to compile
## it might kick you out before it loads

##############################################################

x0xb0x2.name=x0x2561

x0xb0x2.upload.protocol=stk500v2
x0xb0x2.upload.maximum_size=253952
x0xb0x2.upload.speed=57600

x0xb0x2.bootloader.low_fuses=0xDE
x0xb0x2.bootloader.high_fuses=0x90
x0xb0x2.bootloader.extended_fuses=0xFC
x0xb0x2.bootloader.path=stk500v2
x0xb0x2.bootloader.file=stk500boot_v2_x0xb00t2.hex
x0xb0x2.bootloader.unlock_bits=0x3F
x0xb0x2.bootloader.lock_bits=0xCF

x0xb0x2.build.mcu=atmega2561
x0xb0x2.build.f_cpu=16000000L
x0xb0x2.build.core=arduino

##############################################################